Husqvarna TE 250 2010 Repair Manual

E.16
H00648
2
Part. N. 8000 H1489 (10-2009)
GENERAL PROCEDURES
Fuel pump removal (TE – TXC)
- Remove the fuel tank as described in the relevant paragraph.
- Removethetankllercapandpourthefuelcontainedinthetankintoaves-
sel of adequate capacity.
- Use an Allen wrench to loosen the 6 screws (1) and remove the pump (2).
WARNING
On assembly, make sure that the pump O-ring (3) is correctly po-
sitioned in its seat.

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English