Husqvarna TE 250 2010 Repair Manual

H.33Part. N. 8000 H1489 (10-2009)
ENGINE REASSEMBLY
Kick start assembly
Ret the starter ratchet release plate (1) (use a 4 mm wrench, 8 Nm, 0.8 Kgm,
5.8 ft/lb, Loctite 243).
Fit the complete shaft assembly (2) to its seat (B) in the crankcase, making sure
the ratchet is correctly positioned on the shaft (marks lined up) and insert the
spring end (3) into the hole (D).
Fit transmission gear (4), washer (5) and snap ring (6).

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English