To Next Page

To Previous Page

I.8

Part. N. 8000 H1489 (10-2009)

FRONT SUSPENSION

Front fork disassembly (TC - TXC)

Loosen the cap nut at the top of each outer tube.

(Note: it is good practice to moderately slacken the cap nuts before removing

the fork legs from the motorcycle).

Drain oil from the damper unit.

Clamp the wheel axle carrier in a vice and loosen the adjuster screw.

Push down the inner tube.

Slip the tool shown in the gure between wheel axle carrier and cartridge nut.

Hold the nut with a wrench and remove the adjuster screw.

Be careful not to hurt your ngers.

Husqvarna TE 250 2010 Repair Manual

Questions and Answers: