Husqvarna TE 250 2010 Repair Manual

H.49Part. N. 8000 H1489 (10-2009)
ENGINE REASSEMBLY
Camshaft installation
Secure a dial gauge (1) to the spark plug hole.
Turn the crankshaft manually until bringing the piston to Top Dead Centre.
Ret intake camshaft (2) and exhaust camshaft (3) with the gears positioned as
shown in the gure.
Cover parting line "A" is visible through the holes (4).
Make sure that the bushings (5) are in place in the covers.

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English