Husqvarna TE 250 2010 Repair Manual

P.5Part. N. 8000 H1489 (10-2009)
HYDRAULICALLY CONTROLLED CLUTCH
Clutch master cylinder servicing
Drain the circuit, detach the master cylinder from the left side of the handlebar
and take it apart. Replace all seals, reassemble the master cylinder and ret it
to the handlebar. Reconnect the hose and ll fresh uid into the reservoir; bleed
the system as described in the relevant paragraph.

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English