To Next Page

To Previous Page

D.33

SETTINGS AND ADJUSTMENTS

Part. N. 8000 H1489 (10-2009)

Supply hose check (TC)

Check the hose (1) for leaks and replace it as required.

Remove the supply hose as described in Section "E".

Supply hose check (TE – TXC)

Remove saddle and side panels as described in Section "E".

Remove the tank (1) retaining screw (2).

Lift the tank (2) and check the hose (3) running from the pump (4) to the throttle

body (5).

To replace the hose, squeeze the two retainer tabs (6) at one end of the hose

and detach hose. Repeat at the other end of the hose.

Husqvarna TE 250 2010 Repair Manual

Questions and Answers: