Husqvarna TE 250 2010 Repair Manual

J.10
Part. N. 8000 H1489 (10-2009)
REAR SUSPENSION
Checking the setting
If the suspension is not operating properly and you need to adjust compression
damping, loosen the knob dowel (heat with an air gun before loosening).
Proceed as follows:
loosen the ring nut with the suitable key, slide off all parts noting their positions
to ensure correct assembly.

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English