Husqvarna TE 250 2010 Repair Manual

H.56 Part. N. 8000 H1489 (10-2009)
ENGINE REASSEMBLY
Filter and drain plug
Fit the oil lter (1) and tighten the cap (2) into place with its gasket using a 12
mm wrench (25 Nm, 2.5 Kgm, 18.44 ft/lb).
Oil feed hose installation
Ret the hose (1) and tighten the drilled screws (2) with their seals using a 12
mm wrench (8 Nm, 0.8 Kgm, 5.9 ft/lb).

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English