Husqvarna TE 250 2010 Repair Manual

G.13Part. N. 8000 H1489 (10-2009)
ENGINE OVERHAUL
Piston rings
They should show no signs of forcing or scoring.
Replacement pistons come with piston rings and piston pin.
Piston ring to cylinder clearance
Insert the piston ring at the bottom of the bore (where minimum wear occurs)
taking care to position it squarely and measure end gap.
Piston ring to cylinder clearance
PISTON RING MOUNTING CLEARANCE (H) SERVICE LIMIT
"A"
0.15 -0.30 mm
(0.00591-0.01182 in.)
0.45 mm
(0.01773 in.)
"B"
0.2-0.7 mm
(0.00788-0.02758 in.)
0.85 mm
(0.03349 in.)

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English