Husqvarna TE 250 2010 Repair Manual

E.4 Part. N. 8000 H1489 (10-2009)
GENERAL PROCEDURES
Saddle removal
- Turntherearxing(1)counterclockwiseandremovethesaddle.
Side panel removal
- Remove the saddle as described in the relevant paragraph.
- Loosen the retaining screws (1) and remove the side panels (2) and (3).
Battery removal (TE - TCX)
- Remove the saddle as described in the relevant paragraph.
- First remove the BLACK negative cable (8 mm Allen wrench), then the RED
positivecable(whenreassembling,rstconnecttheREDpositivecable,then
the BLACK negative cable); remove the battery (1) from its housing.

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English