Husqvarna TE 250 2010 Repair Manual

H.54 Part. N. 8000 H1489 (10-2009)
ENGINE REASSEMBLY
Right crankcase assembly
Ret the oil pump drive gear (1) and its shaft (2).
Check the O-rings of the oil suction stub (3) and replace them if needed.
Ret the oil suction stub (3).
Ret the centring bushings (4).
Ret the gasket (5).
Manually check for correct installation and operation of the pump (6) and make
sure the crankshaft sealing ring (7) is in the correct position.

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English