EasyManuals Logo

Husqvarna TE 250 2010 Repair Manual

Husqvarna TE 250 2010
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #357 background imageLoading...
Page #357 background image
N.5Part. N. 8000 H1489 (10-2009)
ENGINE COOLING
Engine cooling system overhaul (TC)
If the coolant runs too hot, check the radiators. Any foreign matter trapped
betweenthe ns (suchas leaves, bugs, mud, etc.)will obstruct air ow and
must be removed carefully to avoid damage to radiator. Straighten any bent
nstoensurefreeowofair.Ifthecoolingmassiscloggedordamaged,no
more than 20% of its surface must be affected. If damage exceeds this limit,
the radiator must be replaced. Periodically check the connecting hoses (see
Section B, “Scheduled Maintenance Chart”); this will avoid coolant leakage and
consequent engine seizure. If hoses show cracks, swelling or hardening due
to sheaths desiccation, their replacement shall be advisable. Check the correct
tightening of the clamps.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husqvarna TE 250 2010 and is the answer not in the manual?

Husqvarna TE 250 2010 Specifications

General IconGeneral
BrandHusqvarna
ModelTE 250 2010
CategoryMotorcycle
LanguageEnglish

Related product manuals