To Next Page

To Previous Page

G.23Part. N. 8000 H1489 (10-2009)

ENGINE OVERHAUL

Carburettor inspection (TC)

1 . Check:

- Carburettor body

If dirty: clean.

NOTE

- Clean using petroleum based solvent. Blow all holes and jets with compressed air.

- Never use metal wire.

2. Check:

- Main jet (1)

- Idle jet (2)

- Main nozzle (9)

- Idle screw (7)

- Starting jet (3)

- Main air jet (4)

- Idle air jet (8)

If damaged: replace

If dirty: clean

NOTE

- Clean using petroleum based solvent. Blow all holes and jets with compressed air.

- Never use metal wire.

Husqvarna TE 250 2010 Repair Manual

Questions and Answers: