Husqvarna TE 250 2010 Repair Manual

H.34 Part. N. 8000 H1489 (10-2009)
ENGINE REASSEMBLY
Timing chain and primary drive assembly
Install the timing chain slider (1), tighten the screw (2) using a 5 mm wrench (10
Nm, 0.1 Kgm, 7.3 ft/lb, Loctite 243) and make sure the slider moves freely.
Fit the oil pump drive gear (3) making sure the side with the dot is facing out-
side.
Fit the primary drive double gear (4) making sure to line up the timing dot (A)
with the shaft dot (B).

Husqvarna TE 250 2010 Specifications

General

Brand	Husqvarna
Model	TE 250 2010
Category	Motorcycle
Language	English