Mindray BeneVision N1 User Manual

12 - 6 BeneVision N1 Patient Monitor Operator’s Manual
2. Select the Sequence tab.
3. Set
Duration and Interval of each phase.
12.8.7 Setting the NIBP Display Format
To set the NIBP display format, follow this procedure:
1. Select the NIBP numeric area to enter the
NIBP menu.
2. Select the
Setup tab.
3. Set
Display Format.
12.8.8 Setting the NIBP Alarm Limits Display Switch
To set whether to display the alarm limits of diastolic NIBP and mean NIBP, follow this procedure:
1. Select the NIBP numeric area to enter the
NIBP menu.
2. Select the
Setup tab.
3. Switch on or off
Display Alarm Limits.
12.8.9 Showing/Hiding PR
You can set whether to display the PR value in the NIBP parameter area. To do so, follow this procedure:
1. Select the NIBP numeric area to enter the
NIBP menu..
2. Select the
Setup tab.
3. Switch on or off
Display PR.
12.8.10 Correcting the NIBP Measurements
The middle of the cuff should be at the level of right atrium. If the limb is not at the heart level, the measurement
should be corrected as follows:
■ Add 0.75 mmHg (0.10 kPa) to the displayed value for each centimetre higher.
■ Deduct 0.75 mmHg (0.10 kPa) to the displayed value for each centimeter lower.
12.9 Assisting Venous Puncture
You can use the NIBP cuff to cause sub-diastolic pressure to block the venous blood vessel and therefore help
venous puncture. To assist venous puncture, follow this procedure:
1. Select the NIBP numeric area
→ Setup tab.
2. Set
Venipuncture pressure.
3. Select
VeniPuncture at the bottom of the dialog.
4. Puncture vein and draw blood sample.
5. Select the
NIBP Start/Stop quick key to deflate the cuff. If the cuff is not manually deflated, the cuff
automatically deflates after a fixed period of time (170 seconds for adult and pediatric patient, 85 seconds
for neonatal patient).
During venous puncture, pay attention to the cuff pressure and the remaining time displayed in the NIBP
numerics area.
12.10 NIBP Troubleshooting
This section lists the problems that might occur. If you encounter the problems when using the equipment or
accessories, check the table below before requesting for services. If the problem persists, contact your service
personnel.

Mindray BeneVision N1 Specifications

General

Brand	Mindray
Model	BeneVision N1
Category	Medical Equipment
Language	English