Mindray BeneVision N1 User Manual

24 - 2 BeneVision N1 Patient Monitor Operator’s Manual
24.3 Maintenance and Testing Schedule
Follow the maintenance and testing schedule or local regulations to perform testing and maintenance such as
defined in section
24.5Testing Methods and Procedures. Follow your hospital policy on cleaning and disinfecting
the equipment before testing and maintenance.
The following table lists the maintenance and testing schedule:
24.4 Checking System Software Version
To view system software version information, select the Main Menu quick key → from the System column select
Version.
You can check the detailed system software version, module hardware and software version, and firmware
version only from the
Maintenance dialog.
24.5 Testing Methods and Procedures
Except for the following maintenance tasks, all other test and maintenance tasks should be performed by
Mindray-qualified service personnel only.
■ Regular checks, including visual inspection and power-on test
■ Printer tests
■ Battery check
If your monitor needs a safety test and performance test, contact the service personnel.
24.5.1 Performing Visual Inspection
Visually inspect the equipment before its first use every day. If you find any signs of damage, remove the monitor
from use and contact the service personnel.
Test/Maintenance Item Recommended Frequency
Performance Tests
Visual inspection Every day, before first use.
Measurement module performance test and
calibration
1. If you suspect that the measurement values are incorrect.
2. Follow any repairs or replacement of relevant module.
3. Once a year for CO
2
tests.
4. Once every two years for other parameter module performance
tests.
Analog output test If you suspect that the analog output function does not work
properly.
Defibrillation synchronization test If you suspect that the defibrillation synchronization function does
not work properly.
Electrical Safety Tests
Electrical safety tests Once every two years.
Other Tests
Power-on test Before use.
Network printer tests 1. When first installed.
2.Following any repair or replacement of the printer.
Battery check Functionality test 1. When first installed.
2. When battery is replaced.
Performance test Every three months or if the battery runtime is reduced significantly.

Mindray BeneVision N1 Specifications

General

Brand	Mindray
Model	BeneVision N1
Category	Medical Equipment
Language	English