6
Performing Measurement and Ad-
justment
This section describes the settings that are related to the system environment of the
Controller.
6-1 Executing Test Measurements.................................................................... 6 - 2
6-2 Key Points for Adjustment .......................................................................... 6 - 4
6-2-1 Stabilizing Measurements............................................................................. 6 - 4
6-2-2 Shortening Processing Time......................................................................... 6 - 5
6-3 Useful Functions for Operation .................................................................. 6 - 7
6-3-1 Logging Measurement Values and Measurement Images [Data Log-
ging/Image Logging]...................................................................................... 6 - 7
6-3-2 Saving Data to an External Device [FTP/Network Drive]............................ 6 - 20
6-3-3 Remeasuring Saved Images [Remeasurement]......................................... 6 - 23
6-3-4 Improving Adjustment Efficiency [Judgement result monitor] ..................... 6 - 24
6-4 Analyzing Inspection and Measurement Results [NG Analyzer]........... 6 - 26
6-4-1 Layout of NG Analyzer Window.................................................................. 6 - 26
6-4-2 Using Method of NG Analyzer .................................................................... 6 - 28
6-4-3 Saving Measurement Values ...................................................................... 6 - 30
6-4-4 Changing Judgement Conditions without Stopping Measurement
[Simplified Non-stop Adjustment] ................................................................ 6 - 31
6-4-5 Changing Regions as a Batch [Shift area].................................................. 6 - 32
6-5 Updating the Reference Position Data for a Unit in the Measure-
ment Flow [Update Standard Position Tool]............................................. 6 - 34
6-5-1 Monitoring Measurement Value Trends [Trend Monitor]............................. 6 - 35
6-5-2 Clearing Measurement Results [Clear measurement]................................ 6 - 36
6-5-3 Clearing Saved Images [Clear logging image] ........................................... 6 - 36
6-6 Managing Images used for Model Registration and Reference
[Registered Image Manager] ...................................................................... 6 - 38
6-6-1 Specifying the Destination to Save ............................................................. 6 - 38
6-6-2 Registering Images..................................................................................... 6 - 40
6-6-3 Renaming Image Names ............................................................................ 6 - 41
6-6-4 Deleting Images.......................................................................................... 6 - 41
6-6-5 Loading Images .......................................................................................... 6 - 42
6-7 Verifying Calibration Results [Calibration Support Tool] ....................... 6 - 43
6-7-1 Checking the Calibration Results................................................................ 6 - 43
6-7-2 Data Setting ................................................................................................ 6 - 43
6 - 1
FH/FHV Series Vision System User’s Manual (Z365-E1)
6
To Next Page
Loading...
Need help?
General
