• Be sure to take fail-safe measures externally when controlling stages and robots by using the meas-
urement results of the Sensor Controller (axis movement output by calibration and alignment meas-
urement).
Others (FHV series)
• Use only the dedicated cable (FHV-VN £/FHV-VD £), camera-mount lighting controller (FL-TCC £/
FLV-TCC £), lighting module (FHV-LTM- £), and lens module (FHV-LEM- £). Otherwise, the prod-
uct may malfunction or be broken.
• If anything abnormal occurs, for example, strange smell/sound is detected, the main unit gets very
hot, or a smoke comes, stop using the product, turn OFF the product, and consult OMRON’s branch
or sales office.
• Do not disassemble, deform by pressurizing, incinerate, repair, or alter this product.
• When disposing of the product, treat as industrial waste.
• Do not drop the product or expose it to abnormal vibration or impact. Doing so may lead to product
failure.
• If using the measurement result of the smart camera to operate the stage or robot (output of axis
moving distance by calibration and alignment measurement), be sure to take failsafe measures ex-
ternally.
• The waterproof packing and light shielding sheet are rubber products. Avoid storing them in a loca-
tion where rubber deteriorates.
Precautions for Safe Use
24
FH/FHV Series Vision System User’s Manual (Z365-E1)
To Next Page
Loading...
Need help?
General
