Omron fh series User Manual

3-2
Basic Knowledge about Operations
3-2-1
Inputting Values
This section describes how to input values required for setting the judgement conditions and commu-
nication specifications. Methods for setting up values include the following, depending on the settings.
• Specify values directly with the numeric keyboard:
Used to enter specific values, or to fine-tune the value with the UP and DOWN keys.
• Set numerical values by dragging the slider:
Setting values can be done by dragging the slider on the screen.
The method for displaying the numeric keyboard and setting values is explained here. For other meth-
ods, refer to individual setting descriptions.
1
Click in the item in which a value is to be set.
The numeric keyboard is displayed.
2 Click the numeric keys to input values.
The numerical value is input.
To fine-tune the value, click the UP or DOWN key to increase or decrease the value.
3
Click OK.
This verifies the value and closes the numeric keyboard.
3-2-2
Inputting Text
This section describes methods for inputting file names and descriptive text.
3 Basic Operations
3 - 6
FH/FHV Series Vision System User’s Manual (Z365-E1)

Omron fh series Specifications

General

Brand	Omron
Model	fh series
Category	Machine Vision Systems
Language	English