Omron fh series User Manual

Terminating Remote Operation with Remote Operation PC
1 Click Endin the File menu on the Remote Operation Tool to terminate the remote operation by
the remote operation PC.
A message dialog on the Sensor Controller which indicates the remote operation is in process
will be closed.
10-1-4
Differences from Local Operation and Limitations
There is no fundamental difference between local operation on the Sensor Controller and a remote op-
eration.
Screens on the remote operation PC, however, are not ones of the Sensor Controller themselves.
Therefore, the following differences for its operation can come up.
Major differences are listed as follows:
Functions Sensor Controller Remote operation PC
Controller restart Automatically restart The Controller automatically restarts,
while the remote operation PC waits to
be shut down manually.
Screen capture Screens of the Controller can be cap-
tured.
Screens of the Controller are captured
(not the remote PC screens)
FHV series does not support this.
Image display Display camera images and figures and
so on.
Depending on the Display image
transfer size (Size of the image to
transfer) setting, the roughness of the
display image or figure display changes.
Unit Macro
Unit Calculation Macro
Scene Group Saving Des-
tination Settings
Communication Com-
mand Macro
Line Maintenance
Available Unavailable
10 Advanced Usage
10 - 13
FH/FHV Series Vision System User’s Manual (Z365-E1)
10-1 Remotely Operating the
Controller [Remote Operation]
10
10-1-4 Differences from Local Operation and Limitations

Omron fh series Specifications

General

Brand	Omron
Model	fh series
Category	Machine Vision Systems
Language	English