Parker EME
Introduction
192-120114 N5 C3I22T11 June 2008 15
1.5 Warranty conditions
The device must not be opened.
Do not make any modifications to the device, except for those described in the
manual.
Make connections to the inputs, outputs and interfaces only in the manner des-
cribed in the manual.
Fix the devices according to our mounting instructions. (see page 69)
We cannot provide any guarantee for any other mounting methods.
Note on exchange of options
Compax3 options must be exchanged in the factory to ensure hardware and soft-
ware compatibility.
When installing the device, make sure the heat dissipators of the device receive
sufficient air and respect the recommended mounting distances of the devices
with integrated ventilator fans in order to ensure free circulation of the cooling air.
Make sure that the mounting plate is not exposed to external temperature in-
fluences.
To Next Page
Loading...
Need help?
General