1126700 SmartPAC 2 User Manual
5-46 Program Mode
2. Increment or decrement the OFF DELAY TIME value (maximum is 254 seconds), using
the Up () or Down () cursor key
or
Select the OUTPUT FOLLOWS RESOLVER MOTION setting by pressing the Down
() cursor key with “0” (zero) displayed in the OFF DELAY TIME field or the Up ()
cursor key with “254” displayed in the OFF DELAY TIME field.
3. Press RESET when you are done to return to the Cam Channel Program Type Menu.
Deleting Channel Settings
The DELETE CHANNEL SETTINGS item on the Cam Channel Program Type Menu
enables you to delete programmed settings for a selected cam channel. When you delete cam
channel settings, all programmed angles and times return to 0 (zero).
To delete settings for a selected cam channel, do the following:
1. Select DELETE CHANNEL SETTINGS on the Cam Channel Program Type Menu. The
following window displays, asking you to confirm that you want to delete cam settings.
2. Press CLEAR to delete the channel. You are returned to the Cam Channel Menu.
Viewing the Cam Summary
Once cam channels have been programmed, you can view their settings on a summary screen
accessible from the Cam Channel Menu. To view this screen, do the following:
1. Press F6 (View Cam Summary) on the Cam Channel Menu. The Cam Summary screen,
shown in Figure 5-54, page 5-47, displays with the name, program type, and programmed
settings shown for each programmed cam channel. Global cams are not displayed on this
screen (see Viewing Global Cams, page 5-47).
Figure 5-53. Cam Channel Deletion Confirmation Window
To Next Page
Loading...
Need help?
General
