Cisco NCS 2000 series Troubleshoot Manual

Preface
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do
not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather,
these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection
feature, which may be used in any topological network configuration. Cisco does not recommend using its
path protection feature in any particular topological network configuration.
Note
This section explains the objectives, intended audience, and organization of this publication and describes the
conventions that convey instructions and other information.
This section provides the following information:
• Document Objectives, on page xxxvii
• Audience, on page xxxvii
• Document Organization, on page xxxviii
• Document Conventions, on page xxxviii
• Related Documentation, on page xliv
• Obtaining Optical Networking Information, on page xlv
• Communications, Services, and Additional Information, on page xlv
Document Objectives
This guide gives troubleshooting information and troubleshooting-related parameters for the Cisco NCS 2002
and Cisco NCS 2006 platforms, specifically the dense wavelength division multiplexing (DWDM) application
that can operate on either platform. Use this guide in conjunction with the appropriate publications listed in
the Related Documentation, on page xliv section.
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware and
cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and preferably
have experience as a telecommunications technician.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
xxxvii

Cisco NCS 2000 series Specifications

General

Brand	Cisco
Model	NCS 2000 series
Category	Network Hardware
Language	English