4. POINTS
4-11
4.11 How to Go to a Point
Select the point to go to among the three methods shown below.
• Select the point on the screen
• Select a position on the screen
• Select the point from the points list
After you have selected a point, you can do the following.
• Restart the cross-track error (XTE) indication.
• Stop and restart Go To. (Select the boat icon to display the pop-up menu. Select
[Stop Nav.] and [Restart Nav.] respectively.)
Note: Before you try to go to a point, make sure that the path to the point is clear. Make
sure to zoom your chart to check for hazards which appear on a smaller scale.
To Next Page
Loading...
Need help?
General