Furuno TZT9 User Manual

9. FILE OPERATIONS
9-3
[Import Tracks]: Import tracks from an SD card. When you import tracks from an SD
card, all tracks currently stored in the TZT unit are replaced with those on the SD card.
[Export Tracks]: This unit holds 30,000 tracks in its internal memory. When the capac-
ity for tracks is reached, a new track cannot be entered unless an unnecessary track
is erased. For those reasons, you may want to export all tracks to an SD card.
[Import from NN3D]: Import points and routes from NN3D.
[Export to NN3D]: Export points and routes to NN3D.
[BackUp Settings]: Backup the settings to an SD card. This feature helps you set an-
other multi-function display with the same settings on the SD card.
[Restore Settings]: Load the saved settings from an SD card to this unit.
[BackUp Cloud Data]: Save all points, routes, and track to the cloud.
[Import Cloud Data]: Import data from the cloud.
[Import Method]: Select how to import data, [Add] or [Overwrite]. [Add] adds data to
currently saved data. When the total data exceeds the data capacity, excess data is
not imported.
[Clone SD-Card]: Copy the data between SD cards.
[Clean Points, Routes & Tracks]: Delete all points, routes and tracks currently stored
in the TZT unit.
9.3 File Format
You can select the file format to use to export data.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [Files] - [Export File Format] menu.
3. Select [TZD], [CSV], [GPX] or [KML].
[TZD]: For TZT series
[CSV]: For use with NavNet 3D series
[GPX]: For use with PC plotter
[KML]: For use with PC plotter
4. Select [Close] to exit the menu.
TZD
CSV
GPX
KML
Export File Format
TZD

Furuno TZT9 Specifications

General

Brand	Furuno
Model	TZT9
Category	Monitor
Language	English