Furuno TZT9 User Manual

2. CHART PLOTTER
2-19
3. Select [Delete] in [Delete All Tracks].
The confirmation message appears.
4. Select [Yes].
5. Select [Close] to exit the menu.
2.11.6 How to turn on the automatic deleting of tracks
The internal memory stores a maximum of 30,000 track points. When the memory for
track points becomes full, the equipment automatically deletes the oldest track points
to get space for new track points.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select [Ship & Track].
3. Select the [ON] icon in [Automatic Track Deleting].
2.11.7 How to record tracks
You can record tracks as follows:
1. Select [Track Rec.] from the RotoKey menu. The track is plotted on the screen.
2. To stop plotting the track, select the track then select [Stop Track Rec.].
2.11.8 How to replay a saved track
You can replay a saved track on the screen to use the track to create a route.
1. Select the track to replay. The pop-up menu appears.
2. Select [Follow Track]. The route (blue) is created on the track (red).
2.11.9 How to remove a replayed track
After you have used a replayed track, you can remove the track from the screen as
follows:
1. Select the replayed track to display the pop-up menu.
2. Select [Delete]. The red line is removed and the track remains as the route (blue
line).
2.11.10 Trackback
The trackback feature creates a route with your current track. This feature helps you
return along a previous track to get lobster pots, crab pots, and the like.
Yes No
Are you sure you want to delete all tracks? Important : all Navnet TZT have to be
connected for this operation.

Furuno TZT9 Specifications

General

Brand	Furuno
Model	TZT9
Category	Monitor
Language	English