Furuno TZT9 User Manual

1. SYSTEM INTRODUCTION
1-11
TZTBB: Drag the circle icon to adjust the brilliance of the
power indicator and the backlighting for the key. The bril-
liance level is indicated on the icon. You can also adjust them
with short press of the key repeatedly.
1.5 How to Select a Display
Use the Home key (or icon) and the RotoKey
TM
(or touch control) to select a display,
from the display selection window.
1. Press the Home key (or tap the Home icon) to show the display selection window.
2. Do one of the following:
• TZT9/TZT14: Rotate the RotoKey
TM
to put the required display in the monitor
area at the bottom of the screen then push the key.
• TZT9/TZT14/TZTBB: Select (tap) the required display.
For details, see section 14.2.
Power
indicator
Monitor
area
This icon appears
only when fusion
equipment is
connected.

Furuno TZT9 Specifications

General

Brand	Furuno
Model	TZT9
Category	Monitor
Language	English