Furuno TZT9 User Manual

9. FILE OPERATIONS
9-2
9.2 Files Menu Operation
The [Files] menu of the main menu is where you import and export data.
[Export File Format]: Select the file format to use to export data, among [TZD], [CSV],
[GPX] or [KML].
[Import Points & Routes]: Import points and routes from an SD card. When you import
points and routes from an SD card, all points and routes currently stored in the TZT
unit are replaced with those on the SD card.
[Export All Points & Routes]: This unit holds 30,000 points and 200 routes in its internal
memory. When the capacity for points or routes is reached, a new point or route can-
not be entered unless an unnecessary point or route is erased. For those reasons, you
may want to export all points and routes to an SD card.
Import/Export
Backup/Restore Settings
BackUp Settings
Restore Settings
Restore
Backup
Clean Points, Routes & Tracks
Clean all
Clone SD-Card
Clone
NN3D Import/Export
Import from NN3D
Export to NN3D
Export
Import
Import
Import Points & Routes
Export All Points & Routes
Import Tracks
Export Tracks
Export
Export
Import
TZD
Export File Format
Backup/Restore Data
Restore
Backup Data in the Cloud
Import Tracks
Restore Mode
Backup
Merge

Furuno TZT9 Specifications

General

Brand	Furuno
Model	TZT9
Category	Monitor
Language	English