10-1
10. CAMERA/VIDEO/FUSION-Link
The camera/video function allows you to use your unit to play back images from a vid-
eo player, on-board camera, network camera or DVD player. Network camera images
can be seen across the TZT network. A video signal can be seen only on the TZT that
receives the video signal.
You can also set the video application to show the display of each video in turns. Fur-
ther, you can also adjust the brightness, contrast and color of each image.
FUSION-Link allows compatible TZT displays to interface and
achieve control of specialized FUSION marine entertainment
equipment.
10.1 How to Display a Video Image
The camera application is included in the default display selection window. Press the
Home key (or tap the Home icon) to show the display selection window. Select the
camera display to validate your selection.
10.2 Video Signal Type
There are four types of video signals connected to this equipment.
• Analog: Images from a video player, on-board camera or DVD player
• Digital (IP): Images from a network camera
Note: Turn on the network camera before powering the Multi Function Display.
• Axis Server: Images from an axis server. Available quad mode (Four images are
displayed simultaneously).
• FLIR: Images from an infrared camera
Camera
display
See
section
9.7.
To Next Page
Loading...
Need help?
General