Omron fh-1 series User Manual

9 Saving/Loading Data
9 - 32
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
9-8 Copying Settings for Each Line in
Multi-line Random-trigger Mode
[Line Maintenance]
This tool can be used in Line 0 in Multi-line random-trigger mode to copy line settings for one line to
other lines. It can also clear settings.
This function is only for Multi-line Random trigger mode.
Important
• Launch the Line Maintenance tool from Line 0. It cannot be launched from other lines (1-7).
• System setting data from line 0 can be copied to lines 1-7, but the opposite, copying System
setting data from lines 1-7 to line 0 is not possible.
Additional Information
For copying, or clearing line-specific scene data, or scene group data, select Scene Mainte-
nance from the Function menu.
Refer to 7-3 Editing Scenes [Scene Maintenance] on page 7-6.

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English