Omron fh-1 series User Manual

11 What to Do!
11 - 14
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
 The light does not turn ON at all
• Did you disconnect or connect the Lighting Controller or Light while the power supply was ON?
• Are two or more lights connected?
If more than one light is connected, it may not be possible to turn them ON simultaneously
depending on the total current consumption of the lights. If necessary, set the brightness to 0 for
all of the lights except for the light to turn ON.
Refer to Camera Image Input, Camera Image Input FH, or Camera Image Input HDR in the Vision
System FH/FHV/FZ5 Series Processing Items Reference Manual (Cat. No. Z341).
• Is the [Screen Adjustment Settings] setting of the Camera Image Input FHV processing item the
same as the lighting selection wants to flash?
Only the lighting selected in [Screen Adjustment Settings] will flash.
 The light will not stay ON all the time
• Are two or more lights connected?
If two or more lights are connected, the always-on lighting mode cannot be used for lighting if the
total power consumption of the lights is 7.5 W or higher.
 The light malfunctions
• Is the sequence for turning ON power correct?
If you are using an external power supply, either turn it ON at the same time as the power supply
to the Sensor Controller or turn ON the external power supply first.
11-2-6 Camera with Lighting Controller

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English