Omron fh-1 series User Manual

10 - 13
10 Advanced Usage
Vision System FH/FHV/FZ5 Series User’s Manual (Z365)
10-1 Remotely Operating the Controller
[Remote Operation]
10
10-1-3 Terminating Remote Operation
Precautions for Correct Use
To terminate the [Remote Operation Tool], follow the procedures below.
If you do not follow the procedures below, such as the remote operation PC is shut down or it is
terminated by the task manager, the Sensor Controller may not operate correctly.
This operation can not be used with the FHV series.
1 Click [OK] on the remote operation dialog displayed on the Sensor Controller.
This allows the Sensor Controller to control itself.
For the remote operation PC, a message indicating the remote operation is disconnected is dis-
played.
1 Click [End] in the [File] menu on the Remote Operation Tool to terminate the remote operation
by the remote operation PC.
A message dialog on the Sensor Controller which indicates the remote operation is in process
will be closed.
10-1-3 Terminating Remote Operation
Terminating Remote Operation with Sensor Controller
Terminating Remote Operation with Remote Operation PC

Omron fh-1 series Specifications

General

Brand	Omron
Model	fh-1 series
Category	Machine Vision Systems
Language	English