D-Link DGS-3620-28PC-SI User Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
331
Initialize Host-based Port(s)
This window displays the current initialized host-based ports. This window appears when the Authentication State
is enabled in 802.1X Global Settings window.
To view this window, click Security > 802.1X > Initialize Host-based Port(s) as shown below:
Figure 8-19 Initialize Host-based Port(s) window
The fields that can be configured are described below:
Parameter Description
Unit
Select a unit you want to display.
From Port / To Port
Use the drop-down menus to select a range of ports to display.
MAC Address
Tick the check box and enter the MAC address of the Switch connected to the
corresponding port, if any.
Click the Apply button to accept the changes made.
Reauthenticate Port-based Port(s)
This window is used to display the current status of the re-authenticated port-based port(s). This window appears
when the Authentication State is enabled in 802.1X Global Settings window.
To view this window, click Security > 802.1X > Reauthenticate Port-based Port(s) as shown below:
Figure 8-20 Reauthenticate Port-based Port(s) window
The fields that can be configured are described below:
Parameter Description
Unit
Select a unit you want to display.
From Port / To Port
Use the drop-down menus to select a range of ports to display.
Click the Apply button to accept the changes made.
Reauthenticate Host-based Port(s)
This window is used to display the current status of the re-authenticated host-based port(s). This window appears
when the Authentication State is enabled in 802.1X Global Settings window.
To view this window, click Security > 802.1X > Reauthenticate Host-based Port(s) as shown below:

D-Link DGS-3620-28PC-SI Specifications

General

Brand	D-Link
Model	DGS-3620-28PC-SI
Category	Switch
Language	English