xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
401
Click the <<Back button to return to the previous window.
Click the Apply button to accept the changes made.
DHCPv6 Server Dynamic Binding
This window is used to show the DHCPv6 dynamic binding information.
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Dynamic Binding
as shown below:
Figure 9-20 DHCPv6 Server Dynamic Binding Table window
The fields that can be configured are described below:
Parameter Description
Pool Name
Enter the name of the DHCPv6 pool for which to view dynamic binding information.
Click the Clear button to clear all the information entered in the fields.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to remove all the entries listed in the table.
Click the View All button to display all the existing entries.
DHCPv6 Server Interface Settings
This window is used to display and configure the DHCPv6 Server state per interface
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Interface Settings
as shown below:
Figure 9-21 DHCPv6 Server Interface Settings window
The fields that can be configured are described below:
Parameter Description
Interface Name
Enter the name of the IP interface.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Edit button to re-configure the specific entry.
To Next Page
Loading...
Need help?
General