xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
460
Click the Apply button to initiate the Reset action.
Reboot System
The following window is used to restart the Switch.
Figure 12-21 Reboot System Window
Selecting the Yes radio button will instruct the Switch to save the current configuration to non-volatile RAM before
restarting the Switch.
Selecting the No radio button instructs the Switch not to save the current configuration before restarting the Switch.
All of the configuration information entered from the last time Save Changes was executed will be lost.
Click the Reboot button to restart the Switch.
Figure 12-22 System Rebooting window
To Next Page
Loading...
Need help?
General