xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
456
Enter the location and name of the Destination File.
Increment
Tick the check box to keep the existing configuration before applying to the new
configuration. Deselect the check box to clear the existing configuration before applying to
Click Download to initiate the download.
Upload Configuration
The following window is used to upload the configuration file from the Switch.
Upload Configuration to TFTP
This window allows the user to upload the configuration file from the Switch to a TFTP Server.
Figure 12-14 Upload Configuration File to TFTP window
The fields that can be configured are described below:
Parameter Description
Use the drop-down menu to select a unit for uploading the configuration file.
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IPv6 address used.
Click the radio button to enter the domain name.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
Filter Use the drop-down menu to Include, Exclude or Begin a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Click Upload to initiate the upload.
Upload Configuration to RCP
This window allows the user to upload the configuration file from the Switch to a RCP Server.
To Next Page
Loading...
Need help?
General