xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
453
Figure 12-8 Upload Firmware to TFTP window
The fields that can be configured are described below:
Parameter Description
Use the drop-down menu to select a unit for uploading the firmware.
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IPv6 address used.
Click the radio button to enter the domain name.
Enter the location and name of the Destination File.
Enter the location and name of the Source File.
Click Upload to initiate the upload.
Upload Firmware to RCP
This window allows the user to upload firmware from the Switch to a RCP Server.
Figure 12-9 Upload Firmware to RCP window
The fields that can be configured are described below:
Parameter Description
RCP Server IP
Enter the RCP Server IP Address used.
User Name
Enter the appropriate Username used.
Source File
Enter the location and name of the Source File.
Destination File
Enter the location and name of the Destination File.
Click Upload to initiate the upload.
To Next Page
Loading...
Need help?
General