xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
340
Figure 8-30 DHCP Snooping Max Entry Settings window
The fields that can be configured are described below:
Parameter Description
Select the unit you want to configure.
Use the drop-down menus to select a range of ports to use.
Maximum Entry (1-50) Enter the maximum entry value. Tick the No Limit check box to have unlimited
maximum number of the learned entries.
Enter the maximum entry value for IPv6 DHCP Snooping. Tick the No Limit check
box to have unlimited maximum number of the learned entries.
Click the Apply button to accept the changes made.
DHCP Snooping Entry
This window is used to view dynamic entries on specific ports.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping Entry
as shown below:
Figure 8-31 DHCP Snooping Entry window
To Next Page
Loading...
Need help?
General