xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
398
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Dynamic Binding as
shown below:
Figure 9-13 DHCP Server Dynamic Binding Window
The fields that can be configured are described below:
Parameter Description
Pool Name
Enter the DHCP Server Pool name.
Click the Clear button to clear all the information entered in the fields.
Click the Clear All button to remove all the entries listed in the table.
DHCP Conflict IP
The DHCP server will use PING packet to determine whether an IP address is conflict with other host before
binding this IP. The IP address which has been identified conflict will be moved to the conflict IP database. The
system will not attempt to bind the IP address in the conflict IP database unless the user clears it from the conflict
IP database.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Conflict IP as shown below:
Figure 9-14 DHCP Conflict IP Window
Click the Clear All button to remove all the entries listed in the table.
DHCPv6 Server
DHCPv6 Server Global Settings
This command is used to enable the DHCPv6 server function on the Switch
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Global Settings
as shown below:
Figure 9-15 DHCPv6 Server Global Settings window
The fields that can be configured are described below:
Parameter Description
To Next Page
Loading...
Need help?
General