xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
51
Parameter Description
Enable this option to use the SNMP feature.
Click the Apply button to accept the changes made.
SNMP Traps Settings
Users can enable and disable the SNMP trap support function of the switch and SNMP authentication failure trap
support, respectively.
To view the following window, click Management > SNMP Settings > SNMP Traps Settings, as show below:
Figure 3-37 SNMP Traps Settings window
The fields that can be configured are described below:
Parameter Description
Enable this option to use the SNMP Traps feature.
SNMP Authentication
Enable this option to use the SNMP Authentication Traps feature.
Enable this option to use the SNMP Link Change Traps feature.
Enable this option to use the SNMP Cold Start Traps feature.
Enable this option to use the SNMP Warm Start Traps feature.
Click the Apply button to accept the changes made.
SNMP Linkchange Traps Settings
On this page the user can configure the SNMP link change trap settings.
To view the following window, click Management > SNMP Settings > SNMP Linkchange Traps Settings, as
show below:
To Next Page
Loading...
Need help?
General