4. AIS OPERATION
4-9
4.7 How to Display AIS Target Data
You can display an AIS target's data by selecting it on the display.
4.7.1 AIS pop-up information
The AIS pop-up shows abbreviated AIS data (COG, SOG, CPA
and TCPA and destination*) for the selected AIS target. Simply
put the cursor on the AIS target to show the pop-up. The pop-
up can be enabled or disabled with [AIS POP-UP INFO] in the
[TT•AIS SYMBOL] menu
* Not displayed in CHART for radar mode.
4.7.2 Basic AIS target data
From the Control Unit
1. Use the trackball to put the cursor on the activated AIS target
symbol you want to know its data.
2. Press the TARGET DATA key.
3. The selected target is marked with a broken square and AIS
data is shown in the AIS data box when the target is correctly
selected.
By the trackball module
Click the activated AIS target symbol. The selected target is marked with a broken
square and AIS data is shown in the AIS data box when the target is correctly selected.
AIS no. (information
display order)
Vessel name
Bearing
Range
Course over ground
Speed over ground
CPA
TCPA
Bow crossing range
Bow crossing time
Position
Heading
Navigation
status*
Rate of turn
FURUNO
*: Where the selected AIS target is an aircraft, the
STATUS box shows the aircraft’s altitude.
To Next Page
Loading...
Need help?
General
