Husky Altanium Matrix5 User Manual

User Guide v 1.0 — February 2020 System Setup
System Setup Screen 105
Chapter 10 System Setup
This chapter contains the information necessary to setup the Altanium controller for
operation. Many of the configurations are set in the System Setup screen, which are in
tabbed groups. Other configurations are found in their own screens, selected from the Home
screen. This chapter starts with an introduction to the System Setup screen with descriptions
of the configuration items in the tabs of the screen. The other sections in the chapter describe
the most used system-wide configurations for the Altanium controller and the steps to
complete them.
Users must be given access by approved persons to change items on the System Setup
screen. This is done with assigned user roles from the User Management and Screen Security
tabs. Refer to Chapter 5.
10.1 System Setup Screen
This section gives an introduction to the System Setup screen with descriptions for the
configuration settings that the screen contains.
Touch the System Setup button on the Home screen to see the System Setup screen. Refer
to Figure 10-1.
Figure 10-1 System Setup - Main Screen

Husky Altanium Matrix5 Specifications

General

Brand	Husky
Model	Altanium Matrix5
Category	Controller
Language	English