EasyManuals Logo
Home>Husky>Controller>Altanium Matrix5

Husky Altanium Matrix5 User Manual

Husky Altanium Matrix5
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
v 1.0 — February 2020 Altanium Matrix5
4 Environmental Operating Specifications
1.5 Environmental Operating Specifications
The list that follows shows the environmental operation specifications for the Altanium
Matrix5 operator interface:
• For Indoor use only.
• Operating Temperature: 5 to 40 °C (41 to 104 °F)
• Operating Humidity: 0% to 90% RH, Non-Condensing
• Altitude: up to 2000 m (6562 ft)
• Pollution Degree: PD2
• Overvoltage Category: OVIII
1.6 Equipment Ratings
Ratings for the entire Altanium Controller can be found on the nameplate attached to the
back of the controller.
The following are the equipment ratings for the Altanium Matrix5 Operator Interface only:
• Supply Voltage: 100 to 240 VAC ±10%, single phase
• Frequency: 47 to 63 Hz
• Power Rating: 100 W (typical)
1.7 Technical Specifications
The dimensions and weight of the controller can change based on the controller
configuration.
What follows are the technical specifications for the Altanium Matrix5 Operator Interface
only:
• Width: 430 mm (17 in)
• Height: 420 mm (16.5 in)
• Depth: 380 mm (15 in)
• Weight: 17.9 kg (39.5 lb)
CAUTION!
Mechanical hazard – risk of equipment damage. Falling or spraying liquid, including oil
or water, could damage the equipment. Do not spray wash.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Husky Altanium Matrix5 and is the answer not in the manual?

Husky Altanium Matrix5 Specifications

General IconGeneral
BrandHusky
ModelAltanium Matrix5
CategoryController
LanguageEnglish

Related product manuals