Husky Altanium Matrix5 User Manual

v 1.0 — February 2020 Altanium Matrix5
22 Servo Control
4.1.6 Servo Control
The Servo Control area of the Altanium Home screen gives access to installed systems, such
as the UltraSync-E, the Ultra Shot, or the Altanium Servo Controller. Refer to the appropriate
user guides for more information.
Table 4-8 shows the buttons for the available options that could be installed on your
Altanium system.
NOTE: The Servo Control area will be empty if no other systems are installed.
Earth Leakage Check The system examines all zones for earth leakage conditions.
Circuit Test The system makes sure that there are no heater circuit faults (open circuit,
short circuit, leakage or wrong heater) on all zones.
Table 4-7 System Modes (Continued)
System Mode Description
Table 4-8 Servo Control Options
Screen Description
UltraSync-E
For more information, refer to the UltraSync-E User Guide.
Ultra Shot Controller
For more information, refer to the Ultra Shot Controller User Guide.
Altanium Servo Controller
For more information, refer to the Altanium Servo Controller User Guide.

Husky Altanium Matrix5 Specifications

General

Brand	Husky
Model	Altanium Matrix5
Category	Controller
Language	English