User Guide v 1.0 — February 2020 Making Adjustments
Zone Selection 51
Chapter 7 Making Adjustments
Adjustments can be made to the process settings for a mold setup before starting the mold,
or while the mold is running. This chapter describes how to use the Altanium to monitor and
modify the system.
The Altanium permits zone data to be shown in different graphical and textual formats.
These include tabular views, images with text assigned to them, and views that are divided
into groups of zones.
7.1 Zone Selection
Multiple zones can be selected from the screens that follow:
• Art Process
• Diagnostics Results
• Graphical View
• Mold Diagnostics
• Multi Group View
• Neo2 View
• Process Monitoring
• Quick Set
• Staging
• Text View
• Zone Calibration
• Zone Slot
There are three methods to select zones on a screen:
• Touch one zone element. The individual zone becomes selected (highlighted).
• Touch the Select All button to select all the available zone elements.
• Use the Block function. Touch and hold a zone element for up to a second. This
highlights the zone yellow and/or puts a gray border around it. Touch another zone
element on the screen and the block of zones between the first and second selections
are automatically selected.
To Next Page
Loading...
Need help?
General
