Grove 1-3
GRT9165 OPERATOR MANUAL INTRODUCTION
Published 7-23-2020, Control # 668-02
NOISE/VIBRATION TEST RESULTS
Noise Level Test Results
With closed cab operation, the guaranteed sound power
level at the operator’s station is L
wa
105 dB(A) as measured
by Directive 2006/42/EC. The guaranteed sound power level
at the crane operator position is 80 dB(A) as measured by
Annex G.1 of EN 13000:2010+A1:2014.
Vibration Level Test Results
With closed cab operation, vibration levels at the operator
station are less than 0.5 m/s/s for Whole Body Vibration
exposure and are less than 2.5 m/s/s for Hand Arm Vibration
exposure when measured according to 89/392/EEC
Community Legislation on Machinery per standard ISO
2631/1 – Evaluation of Human Exposure to Work Body
Vibration, ISO 5349 – Guidelines for the Measurement and
Assessment of Human Exposure to Hand Transmitted
Vibrations, and ISO/DIS 8041 – Human Response Vibration
Measuring Instrumentation.
SERIAL NUMBER LOCATION
Refer to Figure 1-3.
When contacting your local Grove distributor or Manitowoc
Crane Care, have the crane serial number available.
Serial numbers are located at these places on the crane:
1. Stamped on frame
2. Data plate inside cab
3. Operator Manual cover
Additionally, the crane serial number is located on the
Service Manual, Parts Manual, and Load Chart Manual.
FIGURE 1-3
Serial Number Locations
10036
3
1
2
To Next Page
Loading...
Need help?
General
