OPERATING PROCEDURES GRT9165 OPERATOR MANUAL
4-74 Published 7-23-2020, Control # 668-02
Alerts Area
The Alerts Area of the ODM Main Screen shows caution and
warning alerts when a crane system is not operating
normally. The following list identifies all possible alerts that
can appear in the Alerts Area (1, Figure 4-75).
An alert can show with one of three outline colors to
emphasize it importance:
• Blue - Limit/Status
• Yellow - Non Critical
• Red - Critical
At the same time the alert can show constant on or flashing
to indicate an additional level of importance.
Name Symbol Description
Crane Fault Active Alert Indicates there is at least one active crane fault that has been viewed.
New Crane Fault Active
Alert
Indicates there is at least one active crane fault that has not been viewed.
Low Fuel Level Alert Indicates the fuel level is low.
Hydraulic Oil
Temperature Warning
Alert
Indicates the hydraulic oil temperature is too high.
Safely stop crane operation and let hydraulic oil cool by running the engine at
idle with no functions actuated.
To Next Page
Loading...
Need help?
General
