MAINTENANCE AND LUBRICATION GRT9165 OPERATOR MANUAL
6-10 Published 7-23-2020, Control # 668-02
CraneLUBE
Grove highly recommends use of Manitowoc CraneLUBE
lubricants to increase crane reliability and performance.
Contact your Grove distributor for information about the
Manitowoc CraneLUBE lubrication program.
Cummins Oil Registration List
Cummins has a program that lists engine oils that have been
tested and meet the requirements of Cummins Engineering
Specifications. A listing of recommended oils is on
QuickServe® Online. Log on to quickserve.cummins.com
and login with a current username and password. Or create
a new account by selecting “Create an Account” under
information, then choose Limited Owners Plan, and register.
Once logged in, click on the “Service” Tab in the top red bar,
“Service Tools” mini-tab and “Oil Registration Lists” link
within the Service Tools list. This will load a list of the different
Cummins Engineering Specification numbers. Select the one
that applies to your engine, and view the registered oils.
Safety
To lubricate many of the locations on the crane, the engine
must be started. Parts of the crane, to include the boom,
superstructure, outriggers, and the like, must be retracted or
extended, or swung left or right, which movement may cause
pinching and crushing hazards.
After positioning areas of the crane for lubrication, turn off the
engine and make sure that the moving parts of the crane are
stopped before approaching.
WARNING
Crushing Hazard!
Movement of the superstructure the boom, and outriggers
may create a crushing and/or pinching hazard.
Make sure that personnel maintain an adequate
clearance from moving parts when these parts are
operated during lubrication of the crane.
Failure to follow this instruction may cause serious injury
or death to personnel.
To Next Page
Loading...
Need help?
General
