Manitowoc Grove GRT9165 User Manual

Grove Published 7-23-2020, Control # 668-02 4-57
GRT9165 OPERATOR MANUAL OPERATING PROCEDURES
4
Table 4-1 – Engine Start/Stop/Throttle Function Screen
Engine Start/Stop/Throttle
See Figure 4-61
Starting/Stopping Engine
1. Press the engine button on the remote control unit
ONCE. The engine start/stop screen (1) appears.
2. To START the engine, hold down either enable button
and the right motion button at the same time. Release
both buttons as soon as the engine starts.
If a condition exists that prevents the engine from being
started, information will be provided in the display.
Common conditions that prevent the engine from being
started are: the carrier transmission is in gear or the
parking brake is released.
3. To STOP the engine, hold down either enable button
and the left motion button at the same time. Release
both buttons once the engine stops.
Changing Engine Speed
1. Press the engine button on the remote control unit
ONCE if already at the engine screen, or TWICE if at the
main screen. The throttle screen (4) appears.
2. To INCREASE engine speed, hold down either enable
button and the right motion button at the same time.
3. To DECREASE engine speed, hold down either enable
button and the left motion button at the same time.
The engine’s speed is shown in the RPM screen (8).
When the remote control unit is on, engine speed cannot be
controlled from the throttle pedal and increment/decrement
switch in the crane cab.
Exiting Start/Stop/Throttle Screen
To exit this screen, press the ESC button on the remote
control unit. The main screen appears.
Item Indicator Name Description
1
Engine (start/stop)
Function
1 - Green = engine can be started or stopped
2 Stop Engine
2a - Blue = engine cannot be stopped until either enable button is held down
2b - Green = engine can be stopped with left motion button
3 Start Engine
3a - Blue = engine cannot be started until either enable button is held down
3b - Green = engine can be started with right motion button
4
Engine Throttle
Function
4 - Green = engine RPM can be changed
5 Decrease RPM
5a - White = engine RPM cannot be decreased until either enable button is held down
5b - Green = engine RPM can be decreased with left motion button
6 Increase RPM
6a - White = engine RPM cannot be increased until either enable button is held down
6b - Green = engine RPM can be increased with right motion button
7
Enable Button
Status
7a - White = both enable buttons released (operation disabled)
7b - Green = either enable button held down (operation enabled)
8 RPM Screen Shows the engine speed

Manitowoc Grove GRT9165 Specifications

General

Brand	Manitowoc
Model	Grove GRT9165
Category	Construction Equipment
Language	English