Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-40 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
BATTERY TIMER SET
Description: Permits the user to select the channels required for battery discharge
recording.
Command Level: 6
Syntax: BATTERY TIMER SET
BA TI SE
Comments: none
Notes: The user may select Binary, LED, or Relay channels for the ‘On Battery’
channels. Analog or Function channels may be selected for the Plant Voltage and Plant
Load channels. The Plant Voltage and Plant Load channels are shared between the VI
and BATTERY TIMER features.
Related Commands: BATTERY TIMER CLR, BATTERY TIMER CSV, BATTERY
TIMER STATUS
Example:
Command<6>: BATTERY TIMER SET
On Battery:
On Battery:
WARNING!!! The Plant Voltage and Load channels are used by both the
BATTERY TIMER and VI features
Plant Voltage: F0001
Plant Voltage:
Plant Load: F0002
Plant Load:
To Next Page
Loading...
Need help?
General
